Solar Car Track Testing

On Tuesday, April 22nd, MIT’s Solar Electric Vehicle Team trooped over to Seekonk Speedway, MA to do track testing. It was a lot of fun, and the weather was nice.

The day started at 5 AM, as we had to make some last minute fixes on the car—namely, installing seatbelts and such. Then, we drove over to the track. The parking lot was huge! The track was a 1/3 mile banked oval and very smooth. We brought snacks.

Track testing was very informative. We found a lot of bugs in the car, which we are working to mend currently. Wish us luck!

Post written by Priya Kikani.

By |Uncategorized|Comments Off on Solar Car Track Testing

MIT Energy Conference

The day started very early with the team gathering at 5am to drive our solar car, Valkyrie, from the Edgerton shop to the MIT energy conference held at Westin Copley Place in Boston. The three car caravan included a lead car, a truck pulling a trailer and a chase car. Valkyrie was carefully unloaded from the trailer and brought up via elevator into the display area.
After catching up on missed sleep some team members returned to the conference around 11am to talk to the conference attendees as they broke for lunch. Later in the afternoon more team members joined for the evening expo. Various energy companies representatives, executives, scientists and the general public wandered around the various booths set up. The team shared our experience building Valkyrie so far and our plans for the American Solar Challenge. People were excited about what we are doing and expressed support and encouragement. The team got to meet some very interested company representatives and even the founders of some energy start ups!
The conference ended at 8pm and Valkyrie was loaded back into the trailer and taken across the Charles river back to MIT where the work continues.

Post written by Michelle Chao.

By |Uncategorized|Comments Off on MIT Energy Conference

No More Breaks

Hope everyone had a great Christmas and New Year’s! Our team was able to relax for a bit after finishing the composite layup. After 2 trips to Maine, 60 hours of work, and $55,000, Valkyrie‘s body has been completed! One of our members, Chris Pentacoff, compiled a cool timelapse video of the process. Check it out below!

Now that the team has taken a much-needed break, the next few months until the race are gonna get hectic. We plan to attend the MIT Energy Conference in late February with an almost-completed solar car. This means a completed solar array, mechanical system, and battery pack all integrated with the composite body. Not to mention that we’re looking for a new truck and trailer. Whew. Let’s hope this month is a good one.

Time to ASC: 195 days

Post written by Julia Hsu.

By |Uncategorized|Comments Off on No More Breaks

Valkyrie Layup, Part 1

With a new year comes new members – lots of them – which makes it a perfect time to start from the basics. First on the agenda for the school year is Valkyrie’s body layup. Now, we have to give a big thanks to Custom Composites Technologies Inc. for really helping us out in this department. Not only did they give us a HUGE oven to bake our molds, but also a lot of workshop space to do the actual layup. The hitch? They’re actually located in Bath, Maine. So add a 3 hour drive (give or take traffic and aggressive drivers) and we’re good to go.

Did I mention that Custom Composites Technologies Inc. also made our molds? They’re really great. If you’re new to this, let’s start from the beginning so that you can really appreciate how much they’ve done for us. First, a male mold is made from a CAD model using a 5 axis CNC. Then the female molds that we actually use for the layup are made as the opposite of the original male mold – the bottom is the red mold and the top is the grey one. The thing about the molds is that the red one was sealed and the grey one wasn’t. So we sealed the top one after cleaning the molds thoroughly for anything that could prevent a good quality finish on the exterior of the car. Meanwhile, we started to make templates for the pieces of fabric going on the car and begin to cut the carbon fiber and kevlar..

If you’ve ever had to make templates and cut materials before, you’ll know just how complicated it can be. Between trying to fit lots of curves and taping materials carefully so they don’t fray, the night started to get pretty long. Finally we got around to sealing and Frekote-ing the molds (so that the carbon fiber and kevlar come cleanly off the molds) and we were ready to get everyone on their feet and putting the pieces of the car together. Then we started mixing epoxy.

In case this all is really new to you, epoxy is a mix of a resin and a hardener, or in other words, a little more work than pulling out a gluestick. Also, you want to mix it constantly and in smaller portions to keep it just right for applying to the fabric. As a result, we had an entire work table covered in plastic cups and epoxy which smelled a lot like fish (in case you were wondering). In hordes around the molds, people intensely applied epoxy all over the carbon fiber/kevlar (carbon fiber on bottom and kevlar with some unifiber carbon fiber on top). Now don’t take this as an easy task either – the canopy just about gave some of us migraines as we tried to fit the pieces we had just cut from templates, but after some quick modifications, things begin to fit properly.

Finally, we just had to vacuum seal both molds and stick them in the oven as we watched the sun rise out of windows that we didn’t realize were there before. Done at 7am. Not a bad 8 hours of work. Granted, that wasn’t the initial plan at all until the truck with our prepregs got delayed. Now mark your calendars – Valkyrie’s body should be finished this Saturday, November 2!

(Time lapse coming soon!)

Post written by another team member.

By |Uncategorized|Comments Off on Valkyrie Layup, Part 1